|
Prisliste Corally
Touring RDX PHI 09
Corally prislisten er beregnet ut i fra valuta
enheten Euro. Vi tar forbehold mot endringer i valuta
kurser og frakt satser.
Vi oppfordrer også til å
benytte Corally sin hjemmeside -->
www.corally.com for
informasjon om produktene.
I varenummer kolonnen
(kolonnen til venstre) ser dere noen varer som har en
(-) etter varenummeret. Det betyr at den varen normalt
ikke er lagervare hos
Minicar Racing ANS, men
bestilles hjem på ordre fra dere. Leveringstid må
påberegnes på disse varene.
|
Vare nr |
Varenavn |
Pris |
|
|
Biler : |
|
|
COR-01620 (-) |
Corally RDX PHI '09 - LIPO Optimized |
3 795,00 |
|
COR-01621 |
Corally RDX PHI '09 - LIPO Optimized US Carpet
Spec. |
3 995,00 |
|
COR-01622 (-) |
Corally RDX PHI
'09 - LIPO/SUB-C |
3 795,00 |
|
|
Reservedeler : |
|
|
COR-1015 |
Diff. balls 2,5mm - Chrome Steel (10 stk.) |
35,00 |
|
COR-1016 |
Diff. balls 2,5mm - Ceramic (10 stk.) - option |
145,00 |
|
COR-10421 |
Antenna Tube |
70,00 |
|
COR-10425 |
Antenna Holder (for use with Corally antenna
tube) |
50,00 |
|
COR-1121 |
Ball Bearings 5,0x9,0mm (2 stk.), for steering
blocks |
100,00 |
|
COR-1122 |
Ball Bearings 4,0x7,0mm (2 stk.) - Flanged, for
belt guide |
100,00 |
|
COR-1124* |
Ball Bearings 1/4x3/8" (2 stk.), for diff.
pulley |
100,00 |
|
COR-1125 |
Ball Bearings 4,0x11,0mm (2 stk.), for
differential |
100,00 |
|
COR-1131 |
Ball Bearings 10,0x15,0mm (2 stk.), for
differential (bearing holder) |
100,00 |
|
COR-1132 |
Ball Bearings 5,0x8,0mm (2 stk.), for center
pulley/steering lever |
100,00 |
|
COR-1133 |
Ball Bearings 3,0x6,0mm (2 stk.) - option |
100,00 |
|
COR-1141 |
Bushings 3,0x6,0mm - for duralu. steering blocks
79278/79278A (4 stk.) |
80,00 |
|
COR-1151 |
Ball Bearings Ceramic 5,0x9,0mm (2 stk.) -
option tilsv. 1121 |
185,00 |
|
COR-1161 |
Ball Bearings Ceramic 10,0x15,0mm (2 stk.) - som
1131 |
185,00 |
|
COR-1162 |
Ball Bearings Ceramic 5,0x8,0mm (2 stk.) - som
1132 |
185,00 |
|
COR-11801* |
Screw titanium - 2mm Hex (FH) M3x6,0mm (6 stk.) |
60,00 |
|
COR-11802* |
Screw titanium - 2mm Hex (FH) M3x8,0mm (6 stk.) |
60,00 |
|
COR-11803 |
Screw titanium - 2mm Hex (FH) M3x10,0mm (6 stk.) |
60,00 |
|
COR-11852 (-) |
Screw titanium set, for RDX PHI '09 (85 stk.) |
520,00 |
|
COR-11960* |
Screw steel - 2mm Hex (PH) M2x5,0mm (6 stk.) |
60,00 |
|
COR-11961* |
Screw steel - 2mm Hex (PH) M2,5x6,0mm (6 stk.) |
60,00 |
|
COR-11962 |
Screw steel - 2mm Hex (PH) M2,5x4,0mm (6 stk.) |
60,00 |
|
COR-11963 (-) |
Screw steel - 2mm Hex (FH) M2,5x6,0mm (6 stk.) -
option |
60,00 |
|
COR-1238 |
Cone Washers 10,0x4,2x0,5mm (10 stk.) - for
differential |
60,00 |
|
COR-1243 |
Screw steel - Torx (FH) M3x16,0mm (10 stk.), for
anti roll bar |
70,00 |
|
COR-1244* |
Screw steel - Torx (FH) M3x6,0mm (10 stk.) |
50,00 |
|
COR-1245 |
Screw steel - Torx (FH) M3x8,0mm (10 stk.) |
50,00 |
|
COR-1246 |
Screw steel - Torx (RH) M3x6,0mm (10 stk.) |
50,00 |
|
COR-1248 |
Screw steel - Torx (RH) M3x8,0mm (10 stk.) |
50,00 |
|
COR-1249 |
Screw steel - Torx (FH) M3x10,0mm (10 stk.), for
79400 |
60,00 |
|
COR-1250 |
Nut steel M3 (10 stk.) |
40,00 |
|
COR-1254 |
Insertnuts M3, long aluminium (4 stk.) |
60,00 |
|
COR-1256* |
Locknuts M3, black aluminium (4 stk.) - option |
60,00 |
|
COR-1257 |
Locknuts M4 - Flanged, black aluminium (4 stk.) |
60,00 |
|
COR-1259 |
Insertnuts M3, aluminium (4 stk.), for molded
C-hubs |
60,00 |
|
COR-1260 |
O-Ring 2,0x1,0mm (10 stk.) |
50,00 |
|
COR-1280 |
Washer steel 3,0x6,0mm (10 stk.) |
50,00 |
|
COR-1281 |
Washer aluminium 3,0mm (10 stk.), for servo |
50,00 |
|
COR-2210* |
Setscrew steel - 1,5mm Hex M3x3,0mm (5 stk.) |
40,00 |
|
COR-2215 |
Setscrew steel - 1,5mm Hex M3x12,0mm (5 stk.) |
40,00 |
|
COR-75710* |
Body Post Nut (8 stk.) |
50,00 |
|
COR-76101 (-) |
Transponder Holder (universal) |
50,00 |
|
COR-77165 |
Diff Shims |
40,00 |
|
COR-79040 (-) |
Wishbone CF6 Medium 5 - Front (1 stk.) - option |
80,00 |
|
COR-790404 (-) |
Wishbone CF6 Medium 5 - Front (4 stk.) - option |
215,00 |
|
COR-79050 (-) |
Wishbone CF6 Medium 5 - Rear (1 stk.) - option |
80,00 |
|
COR-790504 (-) |
Wishbone CF6 Medium 5 - Rear (4 stk.) - option |
215,00 |
|
COR-79060 |
Wishbone CF6 Hard 35 - Front (1 stk.) |
80,00 |
|
COR-790604 |
Wishbone CF6 Hard 35 - Front (4 stk.) |
215,00 |
|
COR-79070 |
Wishbone CF6 Hard 35 - Rear (1 stk.) |
80,00 |
|
COR-790704 |
Wishbone CF6 Hard 35 - Rear(4 stk.) |
215,00 |
|
COR-79080 (-) |
Wishbone CF6 Extra Hard 80 - Front (1 stk.) -
option |
95,00 |
|
COR-790804 (-) |
Wishbone CF6 Extra Hard 80 - Front (4 stk.) -
option |
280,00 |
|
COR-79090 (-) |
Wishbone CF6 Extra Hard 80 - Rear (1 stk.) -
option |
81,25 |
|
COR-790904 (-) |
Wishbone CF6 Extra Hard 80 - Rear (4 stk.) -
option |
280,00 |
|
COR-79111 |
Hingepins - Indre (2 stk.) |
70,00 |
|
COR-79112 |
Hingepins - Ytre (2 stk.) |
70,00 |
|
COR-79113 |
Hingepin Shims, white nylon - Indre 1,4mm (10
stk.) |
50,00 |
|
COR-79114 |
Hingepin Shims, white nylon - Indre 0,5mm (30
stk.) |
70,00 |
|
COR-79116 |
Hingepin E-Clips - Ytre (10 stk) |
60,00 |
|
COR-79117* |
Hingepin Shims - Ytre 0,2mm (10 stk) - option |
60,00 |
|
COR-79118 |
Hingepin Shims - Ytre 0,1mm (10 stk) - option |
60,00 |
|
COR-79132 (-) |
Belt Guide + 2 stk. ball bearings + post |
200,00 |
|
COR-79134 (-) |
Belt - Front S3M (210mm) - option |
105,00 |
|
COR-79135 (-) |
Belt - Rear S3M (510mm) - option |
110,00 |
|
COR-79136 |
Belt - Rear S3M (213mm) |
105,00 |
|
COR-79136A (-) |
Belt - Rear S3M (480mm) - option |
110,00 |
|
COR-79137A |
Belt - Front S3M (186mm) - option |
105,00 |
|
COR-79138 |
Belt - Front S3M (507mm) |
110,00 |
|
COR-79140 |
Wheel Hex Adapter - AL7075 (2 stk.) |
170,00 |
|
COR-79141 |
Wheel Hex Adapter Narrow, AL7075 (2 stk.) -
option |
170,00 |
|
COR-79156 |
Spool with 42 teeth pulley - Front, delrin -
option |
355,00 |
|
COR-79157 |
Spool with 36 teeth pulley - Front, delrin -
option |
355,00 |
|
COR-79159 (-) |
One-Way outdrives lightwight - Front, AL7075 (2
stk.) - option |
185,00 |
|
COR-79169 (-) |
One-Way outdrives - Front, steel (2 stk.) |
185,00 |
|
COR-79180 |
Driveshafts MIP CVD TM - lightweight (2 stk.) |
340,00 |
|
COR-79180ST |
Driveshafts MIP CVD TM - steel (2 stk.) |
340,00 |
|
COR-79182 |
Bones MIP CVD TM - lightweight (2 stk.) |
220,00 |
|
COR-79182A |
Bones MIP CVD TM +2mm - lightweight (2 stk.) |
220,00 |
|
COR-79182ST |
Bones MIP CVD TM, steel (2 stk.) - option |
220,00 |
|
COR-79184 |
Wheel Axles MIP CVD TM (2 stk.) - |
140,00 |
|
COR-79184A |
Wheel Axles MIP CVD TM, Short (2 stk.) - option |
140,00 |
|
COR-79185 |
Couplings & Pins MIP CVD TM (2 stk.) |
120,00 |
|
COR-79189 (-) |
Replacement Driveshaft Caps (2 stk.) |
40,00 |
|
COR-791898 |
Replacement Driveshaft Caps (8 stk.) |
95,00 |
|
COR-79220 |
Shock Absorber - silver hardcoated aluminium (2
stk.) |
410,00 |
|
COR-79221 (-) |
Shock Body + shockcap + adjustment nut |
265,00 |
|
COR-79221A (-) |
Shock Body short (1 par) |
220,00 |
|
COR-79222 (-) |
Shock Piston Shaft + E-clips (2 stk.) |
70,00 |
|
COR-79224A (-) |
Shock Piston, Rounded 1,3mm holes (2 stk.) |
80,00 |
|
COR-79224B (-) |
Shock Piston, Rounded 1,1mm holes (2 stk.) |
80,00 |
|
COR-79224C (-) |
Shock Piston, Rounded 0,9mm holes (2 stk.) |
80,00 |
|
COR-79225 (-) |
Shock Spring Collar Ultra Low - AL7075 (2 stk.) |
90,00 |
|
COR-79226 (-) |
O-ring 13,0x1,0mm for adjustment nut (2 stk.) |
50,00 |
|
COR-79227 |
Shock diaphgram (2 stk.) |
50,00 |
|
COR-79228 |
Shock silicone O-rings + spacers + clip (2 stk.) |
70,00 |
|
COR-79229 |
Shock Collar + ballends + balls (2 stk.) |
90,00 |
|
COR-79230 |
Spring set, black, standard (6 par) - option |
220,00 |
|
COR-79231 |
Spring set, silver, hard (6 par) - option |
220,00 |
|
COR-79252 (-) |
Steering Lever Posts - aluminium (2 stk.) |
90,00 |
|
COR-79253 |
Steering Lever Center Chassis Support, 2.9 mm
Graphite (1 stk.) |
120,00 |
|
COR-79257 |
Steering Lever horisontal ball type - AL7075 (1
stk.) |
165,00 |
|
COR-79258 |
Steering Lever (Horizontal Type), molded (1
stk.) - option |
65,00 |
|
COR-79259 |
Ball Cups 5,8mm - nylon (4 stk.) |
45,00 |
|
COR-79260* |
Ball Cups 4,3mm - nylon (14 stk.) |
90,00 |
|
COR-79261* |
Pivot balls
4,3mm, M3x25mm - AL7075 (4 stk.) |
90,00 |
|
COR-79262 |
Pivot balls 4,3mm, inside front link - hard
steel (2 stk.) |
90,00 |
|
COR-79263 |
Pivot balls 4,3mm, inside rear link - hard
steel (2 stk.) |
90,00 |
|
COR-79264* |
Pivot Balls 4.3 mm, M3 x 5.5 mm – hard steel (4
pcs) |
90,00 |
|
COR-79265 |
Pivot balls 4,3mm, M3x7,5mm - hard steel (4
stk.) |
90,00 |
|
COR-79267 |
Pivot balls short 5,8mm, M3x6,5mm - AL7075 (2
stk.) |
90,00 |
|
COR-79268 |
Pivot balls long 5,8mm, M3x6,5mm - AL7075 (2
stk.) |
90,00 |
|
COR-79269 |
Pivot balls 5,8mm, M3 (inside thread) - AL7075
(2 stk.) |
90,00 |
|
COR-79270A |
Turnbuckles 21mm
w/adj. square - AL7075(2 stk.) |
105,00 |
|
COR-79271A |
Turnbuckles 28mm w/adj. square - AL7075 (2 stk.) |
105,00 |
|
COR-79272A |
Turnbuckles 33mm w/adj. square - AL7075 (2 stk.) |
105,00 |
|
COR-79274* |
Turnbuckles 42mm w/adj. square - AL7075 (2 stk.) |
105,00 |
|
COR-79277* |
Turnbuckle Wrench |
80,00 |
|
COR-79278A (-) |
Steering Blocks + bushing 3x6mm narrow – AL7075
(2 stk.) |
410,00 |
|
COR-79279A (-) |
Steering Blocks + ball bearing 3x6mm narrow-
AL7075 (2 stk.) |
450,00 |
|
COR-79280 (-) |
Steering Blocks - nylon (2 stk.) |
105,00 |
|
COR-79281 (-) |
C-Hub Oo Caster - Front (left/right) - AL7075 (1
stk.) |
220,00 |
|
COR-79282 (-) |
C-Hub 2o Caster - Front (left) - AL7075 (1 stk.) |
220,00 |
|
COR-79283 (-) |
C-Hub 2o Caster - Front (right) - AL7075 (1
stk.) |
220,00 |
|
COR-79284 (-) |
C-Hub 4o Caster - Front (left) - AL7075 (1 stk.) |
220,00 |
|
COR-79285 (-) |
C-Hub 4o Caster - Front (right) - AL7075 (1
stk.) |
220,00 |
|
COR-79286 (-) |
C-Hub 6o Caster -
Front (left) - AL7075 (1 stk.) |
220,00 |
|
COR-79287 (-) |
C-Hub 6o Caster - Front (right) - AL7075 (1
stk.) |
220,00 |
|
COR-79288 (-) |
C-Hub 3o Caster - Front (left) - AL7075 (1 stk.) |
220,00 |
|
COR-79289 (-) |
C-Hub 3o Caster - Front (right) - AL7075 (1
stk.) |
220,00 |
|
COR-79291 |
Screw + Ballscrew M5 for front C-Hub (2 stk.) |
90,00 |
|
COR-79294 |
Upright Rear, vertical ball type - AL7075 (1
stk.) |
220,00 |
|
COR-79296 |
Upright Rear 2o Left - AL7075 (1 stk.) |
220,00 |
|
COR-79297 |
Upright Rear 2o Right - AL7075 (1 stk.) |
220,00 |
|
COR-79298 (-) |
Upright Narrow (1mm pr. side) Rear - AL7075 (1
stk.) |
220,00 |
|
COR-79330A |
Bumper Lower + alu. inserts - reinforced nylon |
120,00 |
|
COR-79336 |
Bumper Foam large - Extra hard |
90,00 |
|
COR-79365 (-) |
Battery Strap Posts (2 stk.) |
105,00 |
|
COR-79383 |
Balancing weight, low COG, Chassis mounted 25
gram (1 stk.) |
155,00 |
|
COR-79384 |
Balancing weight, low COG, Under Lipo Mounted 30
gram (1 stk.) |
170,00 |
|
COR-79395A |
Servo Posts lightwieght - AL7075 (2 stk.) |
105,00 |
|
COR-79397 |
Servo Posts + screws - molded (1 par) |
55,00 |
|
COR-79400 |
Body posts - Front (2 stk.) |
105,00 |
|
COR-79405 |
Body posts - Rear (2 stk.) |
105,00 |
|
COR-79430 |
Anti-roll Bar Clamps (2 stk.) |
45,00 |
|
COR-79432 |
Anti-roll Bar Balls 5,8mm for CF6 (2 stk.) |
90,00 |
|
COR-79500 (-) |
Motor Cooling Fan 30mm (5-6V) + universal
receiver plug |
125,00 |
|
COR-79510 (-) |
Motor Guard - AL7075 |
253,75 |
|
COR-79515 (-) |
Motor Cooling kit (motor guard + cooling fan) |
335,00 |
|
COR-79604 (-) |
Bulkhead, Front – AL7075 (1 pc.) |
265,00 |
|
COR-79605 (-) |
Bulkhead, Rear – Left – AL7075 (1 pc.) |
520,00 |
|
COR-79606 (-) |
Bulkhead, Rear – Right – AL7075 (1 pc.) |
490,00 |
|
COR-79607 (-) |
Bulkhead Center Brace, Rear – AL7075 (1 pc.) |
155,00 |
|
COR-79620 |
Bearing Holders, Front – Molded (1 pair) |
85,00 |
|
COR-79621 |
Bearing Holders, Rear – Molded (1 pair) |
85,00 |
|
COR-79622 |
Bearing Holders, Rear – Center WB – Molded (1
pair) |
85,00 |
|
COR-79630 |
Steering Blocks PHI'09 – Molded (1 pair) |
95,00 |
|
COR-79631 |
Steering Blocks PHI'09 with bushings – AL7075 (1
pair) |
410,00 |
|
COR-79632 |
Steering Blocks PHI'09 with ball bearings –
AL7075 (1 pair) |
450,00 |
|
COR-79635 |
Rear Uprights – Molded (1 pair) |
95,00 |
|
COR-79643 |
Front C-Hubs – Molded – 3° Caster (1 pair) |
135,00 |
|
COR-79646 |
Front C-Hubs – Molded – 6° Caster (1 pair) |
135,00 |
|
COR-79655 |
Spool Front – AL7075 |
305,00 |
|
COR-79667 |
One-way + hardened steel outdrives – AL7075 |
410,00 |
|
COR-79670 |
Pulley 36 teeth for lightwight differential |
120,00 |
|
COR-79671 |
Pulley 36 teeth for duraluminium spool/front
1-way |
120,00 |
|
COR-79672 |
Pulley 42 teeth for lightweight differential |
120,00 |
|
COR-79673 |
Pulley 42 teeth for duraluminium spool/front
1-way |
120,00 |
|
COR-79680 |
Differential Front/Rear – AL7075 |
410,00 |
|
COR-79681 |
Diff. Outdrive, short – AL7075 |
170,00 |
|
COR-79682 |
Diff. Outdrive, long – AL7075 |
170,00 |
|
COR-79683 |
Diff. rebuild kit inkl. thrust ball bearing + M4
diff. nut (1 stk.) |
145,00 |
|
COR-79684 |
Diff. Washers (1 par) |
75,00 |
|
COR-79685 |
Diff. nut Wrench – 7mm hex – graphite (1 stk.) |
55,00 |
|
COR-79697 |
Bearing Holder Clips (4 stk.) |
35,00 |
|
COR-79698 |
Bearing Holder Front, left for diff./spool,
right for 1-way – AL7075 |
200,00 |
|
COR-79699 |
Bearing Holder Front, right for diff./spool,
left for 1-way – AL7075 |
200,00 |
|
COR-79700 |
Bearing Holder Rear, left (256/264mm) – AL7075 |
200,00 |
|
COR-79701 |
Bearing Holder Rear, right (256/264mm) – AL7075 |
200,00 |
|
COR-79702 |
Bearing Holder Rear, left (260mm) – AL7075 |
200,00 |
|
COR-79703 |
Bearing Holder Rear, right (260mm) – AL7075 |
200,00 |
|
COR-79720 |
Wishbone Mounting Balls – Aluminium (4 pcs) |
60,00 |
|
COR-79721 (-) |
Wishbone Mounts – AL7075 – 0,5 (2 pcs) |
155,00 |
|
COR-79722 (-) |
Wishbone Mounts – AL7075 – 1,0 (2 pcs) |
155,00 |
|
COR-79723 (-) |
Wishbone Mounts – AL7075 – 1,5 (2 pcs) |
152,50 |
|
COR-79724 (-) |
Wishbone Mounts – AL7075 – 2,0 (2 pcs) |
155,00 |
|
COR-79725 (-) |
Wishbone Mounts – AL7075 – 2,5 (2 pcs) |
155,00 |
|
COR-79727 (-) |
Wishbone Mounts – AL7075 – 0 (2 pcs) |
155,00 |
|
COR-79728 |
Wishbone Mounts – Molded – 0,5 / 1,0 / 1,5 / 2,0
(2 each) |
105,00 |
|
COR-79729 |
Wishbone Mount Shims #1 (0,6 mm) – Aluminium (10
pcs) |
80,00 |
|
COR-79730 |
Wishbone Mount Shims #2.5 (1,5 mm) – Aluminium
(10 pcs) |
95,00 |
|
COR-79742 |
Shock Tower Front – 2.9 mm Graphite (1 pc.) |
170,00 |
|
COR-79743 |
Shock Tower Rear – 2.9 mm Graphite (1 pc.) |
185,00 |
|
COR-79744 |
Shock Tower Rear 'LOW' – 2.9 mm Graphite (1 pc.) |
185,00 |
|
COR-79801 |
Layshaft + spacer – AL7075 |
120,00 |
|
COR-79807 |
Center pulley for front/rear belt 21 teeth –
AL7075 |
170,00 |
|
COR-79808 (-) |
Spur Gear + Pulley Adapter – AL7075 |
335,00 |
|
COR-79809 (-) |
Spur Gear Guide Ring – AL7075 |
130,00 |
|
COR-79810 (-) |
Front 1-Way/Spool Pulley Guide Ring – AL7075 |
106,25 |
|
COR-79817 |
Center pulley for front/rear belt 17 teeth –
delrin |
65,00 |
|
COR-79818 |
Center pulley for front/rear belt 18 teeth –
delrin |
65,00 |
|
COR-79821 |
Center pulley for front/rear belt 21 teeth –
delrin |
65,00 |
|
COR-79825 |
Center pulley Clip large – black nylon (2 stk.) |
40,00 |
|
COR-79832 |
Bumperplate Upper 2.4mm - Graphite |
170,00 |
|
COR-79840 (-) |
Chassis 6-Cell SUB-C / LiPo – 2.4 mm Graphite (1
stk.) |
850,00 |
|
COR-79841 (-) |
Chassis 6-Cell SUB-C / LiPo – 2.0 mm Graphite (1
stk.) |
815,00 |
|
COR-79842 (-) |
Chassi Lipo Optimized – 2.4 mm Graphite (1 stk.) |
850,00 |
|
COR-79843 (-) |
Chassi Lipo Optimized – 2.9 mm Graphite (1 stk.) |
880,00 |
|
COR-79859 (-) |
Topdeck 2.4mm - Graphite |
250,00 |
|
COR-79870 |
LiPo Battery Holders + Screws (4 stk.) |
70,00 |
|
COR-79864 (-) |
Battery Strap – Graphite |
145,00 |
|
COR-79908 |
Rear Bearing Holder Plate – 2.9 mm Graphite (1
pc.) |
155,00 |
|
COR-79910 (-) |
Anti-roll Bar set 1,0mm Black - Rear |
265,00 |
|
COR-79912 |
Anti-roll Bar set 1,3mm Silver - Rear |
265,00 |
|
COR-79913 |
Anti-roll Bar set 1,3mm Silver - Front |
265,00 |
|
COR-79914 (-) |
Anti-roll Bar set 1,6mm Brass - Rear |
265,00 |
|
COR-79915 (-) |
Anti-roll Bar set 1,6mm Brass - Front |
265,00 |
|
COR-79916 (-) |
Anti-roll Bar set 1,9mm Black - Rear |
265,00 |
|
COR-79917 (-) |
Anti-roll Bar set 1,9mm Black - Front |
265,00 |
|
COR-79920 (-) |
Anti-roll Bar Wire 1,0mm Black - Rear |
80,00 |
|
COR-79922 (-) |
Anti-roll Bar Wire 1,3mm Silver - Rear |
80,00 |
|
COR-79923 (-) |
Anti-roll Bar Wire 1,3mm Silver - Front |
80,00 |
|
COR-79924 |
Anti-roll Bar Wire 1,6mm Brass - Rear |
80,00 |
|
COR-79925 |
Anti-roll Bar Wire 1,6mm Brass - Front |
80,00 |
|
COR-79926 (-) |
Anti-roll Bar Wire 1,9mm Black - Rear |
80,00 |
|
COR-79927 |
Anti-roll Bar Wire 1,9mm Black - Front |
80,00 |
|
COR-80010 |
Team CORALLY Diff Lube, White – For the large
diff balls |
70,00 |
|
|
Touring Felger : |
|
|
COR-75888H (-) |
Wheel Corally Factory Team 24mm white - Hard (2
par) |
90,00 |
|
COR-75888XH (-) |
Wheel Corally Factory Team 24mm white - Extra
Hard (2 par) |
90,00 |
|
COR-RPW (-) |
Wheel RP Racing Dish (2 par) |
110,00 |
|
|
Dekkinnlegg : |
|
|
COR-RPM (-) |
Insert RP Racing - Medium (2 par) |
155,00 |
|
COR-14392 (-) |
Insert Molded Orange - Soft (1 par) |
60,00 |
|
COR-14393 (-) |
Insert Molded Pink - Medium (1 par) |
60,00 |
|
COR-14394 (-) |
Insert Molded Purple - Hard (1 par) |
60,00 |
|
COR-14395 (-) |
Insert Molded Black - Extra Hard (1 par) |
60,00 |
|
COR-JBBT (-) |
Insert JB Foam - Blue Thin 24mm (2 par) |
80,00 |
|
|
Gummidekk : |
|
|
COR-RP24 (-) |
RP-24 Racing (uten innlegg) - 2 Par |
245,00 |
|
COR-RP30 (-) |
RP-30 Racing (uten innlegg) - 2 Par |
245,00 |
|
COR-CS224 (-) |
Take Off CS22 (uten innlegg) - 2 Par |
245,00 |
|
COR-CS274 (-) |
Take Off CS27 (uten innlegg) - 2 Par |
245,00 |
|
|
Ferdiglimte Gummidekk på Felg : |
|
|
COR-RP24GL (-) |
RP-24 Racing (ferdiglimt på felg) - 2 par |
370,00 |
|
COR-RP30GL (-) |
RP-30 Racing (ferdiglimt på felg) - 2 par |
370,00 |
|
COR-CS27GL (-) |
Take Off CS27 (ferdiglimt på heldekkende felg) -
2 par |
370,00 |
|
COR-CS27JB (-) |
Take Off CS27 (ferdiglimt på 7588H m/JB Blue
Foam) - 2 par |
370,00 |
|
|
Ferdiglimte Skumdekk på Felg : |
|
|
COR-14450 (-) |
Pink 26mm on 6-spoke wheel white - 1 par |
150,00 |
|
COR-14451 (-) |
Purple 26mm on 6-spoke wheel white - 1 par |
150,00 |
|
COR-14452 (-) |
Double Purple 26mm on 6-spoke wheel white - 1
par |
150,00 |
|
COR-14453 (-) |
Plaid 26mm on 6-spoke wheel white - 1 par |
165,00 |
|
COR-14456 (-) |
Gold 26mm on 6-spoke wheel white - 1 par |
165,00 |
|
COR-14460 (-) |
Pink 30mm on 6-spoke wheel white - 1 par |
150,00 |
|
COR-14461 (-) |
Purple 30mm on 6-spoke wheel white - 1 par |
150,00 |
|
COR-14462 (-) |
Double Purple 30mm on 6-spoke wheel white - 1
par |
150,00 |
|
COR-14463 (-) |
Plaid 30mm on 6-spoke wheel white - 1 par |
165,00 |
|
|
Touring Karosseri Protoform : |
|
|
COR-PF1476-01 |
Protoform Dodge Stratus 3.0 (190mm) |
265,00 |
|
COR-PF1465-00 |
Protoform Mazda 6 (190mm) |
265,00 |
|
